Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Install the #3 bow to the main control link bracket.

Fig 1: #2, #3, #4 & #5 Bow To Main Control Link Bracket

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the #3 bow screws to the main control link bracket (3).
Tighten: Tighten roof bow to the main control link bracket screws to 13 N.m (10 lb ft).

Fig 2: Staple Stay Pad To #2, #3, & #4 Bow

Courtesy of GENERAL MOTORS CORP.

Staple the stay pad to the #3 bow (3).
Install the headliner screws to the #3 bow.
Tighten: Tighten the headliner screws to 2 N.m (18 lb in).
Refer to Folding Top Roof Bow Replacement (Number 1 Bow) or Folding Top Roof Bow Replacement (Number 2 Bow) or Folding Top Roof Bow Replacement (Number 3 Bow) or Folding Top Roof Bow Replacement (Number 4 Bow) or Folding Top Roof Bow Replacement (Number 5 Bow) .