Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Install the top cover retainer to the #1 bow.
Using the rivets provided, push the shank of the rivet through the retainer. With an assistant install the rivet into the bow using a large tapered punch, hammer until the rivet is flush.

Fig 1: Staple Headliner To Bow

Courtesy of GENERAL MOTORS CORP.

Staple the headliner to the bow.
Before stapling the top cover to the #1 bow, refer to Folding Top Cover Tension Adjustment - Front .
Return the folding top to the original position.