LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Bumper System) >> Repair Instructions >> Lamp Deflector Replacement - Front Bumper Fascia >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • If the vehicle has the fog lamp option ensure that the fog lamp opening filler has been removed from the fascia deflector.
  • If the vehicle does not have the fog lamp option ensure that the fog lamp opening filler has been installed to the fascia deflector.
    Fig 1: Fascia Lamp Deflector Bolts
    GM63724Courtesy of GENERAL MOTORS CORP.
  1. Position the fascia lamp deflector to the fascia.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fascia lamp deflector to fascia bolts.

    Tighten:  Tighten the fascia lamp deflector bolts to 3 N.m (27 lb in).

  4. Install the fog lamp, if removed. Refer to Fog Lamp Replacement - Front in Lighting Systems.
  5. Install the front fascia close out panel. Refer toClose Out Panel - Front Bumper Fascia Lower  .