Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the push pins from the ends of the lower garnish molding.
- Pull the molding with the molding retainers from the body panel.
- Remove the rear window lower garnish molding.
- Remove the support trim panel from rear compartment front support.
- Uncover the seat belt upper guide bolt by pushing up at the belt edge of the cover and flipping up the cover.
- Remove the seat belt upper guide bolt.
- Remove the push-in retainer attaching the side trim panel to the rear compartment front support.
- Pull the side trim panel from the rear side of the roof.
- Pull the side trim panel from the roof bow.
- Pull the side trim panel from the lock pillar.