LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1281 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Courtesy Lamp Assembly To RH Lower Closeout Panel
    GM64671Courtesy of GENERAL MOTORS CORP.
  1. Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the RH lower closeout panel.
    2. Fig 2: RH Lower Closeout Panel Push-In Retainers To I/P Lower Support Beam
    GM95690Courtesy of GENERAL MOTORS CORP.
  2. Remove the RH lower closeout panel push-in retainers from the I/P lower support beam.
  3. Lower the closeout panel slightly, and finesse the left side of the closeout panel from above the driveline tunnel.
  4. Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
  5. Continue to lower the closeout panel, then pull to remove from the dash panel studs.
  6. Remove the closeout panel.
scientia non olet · About LEMON Manuals