Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of EVAP Canister Vent Valve & Bracket

Courtesy of GENERAL MOTORS CORP.

Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
For vehicles equipped with an automatic transmission, remove the right muffler. Refer to Muffler Replacement - Right in Engine Exhaust.
Remove the evaporative emission (EVAP) vent valve (2) from the bracket (1).

Fig 2: Rear EVAP Purge Pipe & Chassis Purge Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the rear EVAP purge pipe (1) at the chassis EVAP purge pipe (3).
Cap the chassis EVAP purge pipe.

Fig 3: View Of EVAP Canister Access Cover In Right Rear Wheelhouse

Courtesy of GENERAL MOTORS CORP.

Remove the right rear wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Rear End.
Remove the EVAP canister access cover.

Fig 4: EVAP Canister & Purge Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the EVAP purge pipe at the canister.
Remove the rear EVAP purge pipe.