Filling Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the transmission fluid drain plug.
Tighten: Tighten the transmission fluid drain plug to 27 N.m (20 lb ft).
- Clean away all dirt and debris from the transmission fluid fill plug area.
- Remove the fill plug.
- Fill the transmission with DEXRON®-III transmission fluid, until even with the bottom of the fill plug hole.
- Install the transmission fluid fill plug.
Tighten: Tighten the transmission fluid fill plug to 27 N.m (20 lb ft).
- Lower the vehicle.
NOTE:
Refer to Fastener Notice in Cautions and Notices.