Engine Flywheel Installation (Manual Transmission)
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
J 36660-A Torque Angle Meter
- Install the flywheel.NOTE: Refer to FASTENER NOTICE .
- Install the new flywheel bolts.
Tighten
Tighten the bolts to 15 N.m (11 Ib. ft). Use the J 36660-A to tighten the bolts an additional 50 degrees.