LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Body Rear End) >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the appropriate drill bit in order to drill the head from the rivet (2).
  2. Remove the rivets (2).
  3. Remove the roof drip molding (1).
  4. Fig 1: Removing & Installing Rear Roof Drip Molding
    G02507175Courtesy of GENERAL MOTORS CORP.