LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Body Rear End) >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the weatherstrip adhesive GM P/N 12345096, the Canadian P/N 993365, or the equivalent in order to install the roof drip molding (1).
  2. Use a hand-held rivet gun in order to install the new rivets (2).
    3. Fig 1: Removing & Installing Rear Roof Drip Molding
    G02507176Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals