LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1253 (Exterior Trim) >> Repair Instructions >> Molding/Nameplate Replacement - Exterior Trim >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Remove the emblem or the molding:

  1. Apply masking tape to the body side border of the emblem or the molding in order to protect the body from scratches. The tape will also aid in aligning the moldings during installation.
  2. Use J 41409 or a 0.8 mm (0.03 in) fishing line in order to cut through the adhesive material. See Figure.
scientia non olet · About LEMON Manuals