LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1243 (Seat Belt System) >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Verify that the release lever at the top of the bracket is in the full up position.

  1. Position shoulder belt guide adjuster bracket to the upper center pillar.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the shoulder belt guide belt adjuster bracket bolts.

    Tighten  Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

  3. Install the upper quarter trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER UPPER (SEDAN) in Interior Trim.
    Fig 1: Installation Shoulder Belt Guide Adjuster Bracket
    G01504726Courtesy of GENERAL MOTORS CORP.