Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front seat from the vehicle. Refer to SEAT REPLACEMENT - FRONT BUCKET .
- Remove the front seat trim panel. Refer to TRIM PANEL REPLACEMENT - FRONT SEAT .
- Remove the J-hooks from the seat cushion trim cover.
- Position the seat back to the full down position.
- Fold back the seat cushion pad and trim cover to access the adjuster bolts.
- Remove the cross brace to adjuster bolts.
- Remove the adjuster from the seat cushion frame.
- Remove the adjuster crosswire and assist springs.
- Remove the E/Z entry cable from the adjuster, if equipped.
- Separate the left and the right adjusters by removing the cross brace bolts.