Diagnostic Procedures
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Did you perform the Diagnostic System Check - Engine Controls? If yes, go to next step. If no, go to DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS under SELF-DIAGNOSTIC SYSTEM.
- Ensure ignition is on. Using scan tool, select Chassis Application and attempt to display ABS data. Can ABS data be displayed? If yes, see INTERMITTENT CONDITIONS under SELF-DIAGNOSTIC SYSTEM. If no, perform anti-lock brake diagnostic system check. See DIAGNOSTIC SYSTEM CHECK in appropriate ANTI-LOCK article in BRAKES.