LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Rear Suspension - Old Style) >> Removal & Installation >> Stabilizer Shaft >> Removal

Stabilizer Shaft: Removal

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2000 GMC Yukon, 2000 GMC Pickup, 2000 GMC Cab & Chassis, 2000 GMC C3500 HD, and 2000 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the lower nuts (8 and 20), the washers (9 and 19), and the bolts (14 and 18) from the stabilizer links. See Figure .
  3. Remove the bolts (15) from the clamps. See Figure .
  4. Remove the clamps (12 and 17) and the insulators (13 and 16). See Figure .
  5. Remove the stabilizer shaft (4). See Figure .
scientia non olet · About LEMON Manuals