LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Rear Suspension - Old Style) >> Removal & Installation >> Stabilizer Shaft Link Bracket (C/K3 Models) >> Removal

Stabilizer Shaft Link Bracket (C/K3 Models): Removal

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2000 GMC Yukon, 2000 GMC Pickup, 2000 GMC Cab & Chassis, 2000 GMC C3500 HD, and 2000 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the link nut (11), the link bolt (7), the link spacer (9), and the insulators (6, 8, and 10) from the stabilizer links. See Fig 1 .
  3. Inspect the components for wear.
Fig 1: Removing Stabilizer Link Components (3500 Series)
G00138027Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals