Leaf Spring (Hd Chassis): Removal
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2000 GMC Yukon, 2000 GMC Pickup, 2000 GMC Cab & Chassis, 2000 GMC C3500 HD, and 2000 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Support the rear axle independently in order to relieve the tension on the leaf springs.
- Remove the U-bolt nuts. See Fig 1 .
- Remove the washers.
- Remove the anchor plate.
- Remove the U-bolts.
- Remove the spacer, loosen the shackle to spring nut.
- Remove the shackle, the shackle to rear bracket nut, the washers, and the bolt.
- Remove the spring to front bracket.
- Remove the nut, the washers, and the bolt from the spring to front bracket.
- Remove the spring assembly from the vehicle. See Fig 1 .