LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Engine Mechanical - 3.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the left engine mount strut bracket to the cylinder head.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the left engine mount strut bracket bolts.

    Tighten 

    Tighten the engine mount strut bracket bolts to 50 N.m (37 lb ft).

    Fig 1: Installing Left Engine Mount Strut Bracket To Cylinder Head
    G02081348Courtesy of GENERAL MOTORS CORP.
  3. Install the left engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement  .
  4. Install the engine coolant temperature (ECT) sensor. Refer to ENGINE COOLANT TEMPERATURE SENSOR in Engine Performance - Removal and Installation.
  5. Fill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM in Engine Cooling.
    Fig 2: Installing Left Engine Mount Strut To Left Engine Mount Strut Bracket
    G02081349Courtesy of GENERAL MOTORS CORP.