Removal & Installation (4.3L)
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Remove engine cover. Remove nut retaining engine wiring harness bracket to intake manifold stud near EVAP canister purge solenoid on right side of engine. Remove engine wiring harness bracket from intake manifold mounting stud.
- Disconnect EVAP canister purge solenoid pipe at the EVAP canister purge solenoid and secure aside. Disconnect EVAP canister purge solenoid electrical connector. Remove EVAP canister purge solenoid mounting nuts. Remove EVAP canister purge solenoid from intake manifold mounting studs.