LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1198 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE .
  1. Install the engine oil pressure.

    Tighten 

    Tighten the engine oil pressure sensor to 16 N.m (12 lb ft).

  2. Connect the engine oil pressure sensor electrical connector.
  3. Lower the vehicle.
  4. Fill the crankcase as necessary. Refer to Engine Oil and Oil Filter Replacement .
    Fig 1: Engine Oil Pressure Sensor
    G01703360Courtesy of GENERAL MOTORS CORP.