Removal Procedure
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the electrical center cover
- Locate the relay. Refer to UNDERHOOD FUSE BLOCK
to locate the electrical center where the relay existsIMPORTANT:
- Always note the orientation of the relay
- Make sure the electrical center is secure, as not to put added stress on the wires or terminals
- Using the J 43244
(1) position the tool on opposing corners of the relay (2)NOTE: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.
- Remove the relay (2) from the electrical center