LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Engine Controls - Removal, Overhaul & Installation) >> Emission Systems & Sub-Systems >> Secondary Air Injection Shut Off Valve >> Removal & Installation (4.0L - Bank 2)

Removal & Installation (4.0L - Bank 2)

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bank 2 is the cylinder head that is closest to front of engine compartment. Remove air cleaner assembly. Disconnect the vacuum lines from the Secondary Air Injection (AIR) shut off valve. See Fig 1. Loosen and lower the pinch clamp connecting the bank 2 intermediate pipe/hose to the bank 2 shut off valve. Disconnect the hose from the shut off valve.
  2. Remove the two nuts securing the bank 2 AIR shut off to the bracket. Remove the bank 2 AIR shut off valve from the bracket. To install, reverse removal procedure. Tighten the AIR shut off valve nuts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating Bank 2 AIR Shut Off Valve (4.0L)
G00112795Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals