LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1187 (Interior Trim) >> Repair Instructions >> Trim Replacement - Lock Pillar (Upper Convertible) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lock pillar upper trim.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screw securing the upper trim to the lock pillar.

    Tighten 

    Tighten the lock pillar upper trim screw to 1.8 N.m (16 lb in).

  3. Install the spacer and washer to the seat belt guide stud.
    Fig 1: Upper Trim
    G01451769Courtesy of GENERAL MOTORS CORP.
  4. Install the upper seat belt guide.

    Tighten 

    Tighten the upper guide nut to 40 N.m (29 lb ft).

    Fig 2: Installing Seatbelt Upper Guide To Stud
    G01451770Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals