LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1186 (Seat System) >> Repair Instructions >> Seat Back Cover and Pad Replacement - Front (RPO AR9 Base Seat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the foam pad over the seat back frame (if removed).
  2. Attach the foam pad top straps with fir tree fasteners (if removed).
  3. Position the cover over the foam.
  4. Carefully tuck the seat back material behind the release lever bezel.
  5. Zip the cover closed.
  6. Firmly pull the seat back cover down over the seat frame.
  7. Hook the seat back lower trim cover J strip.
    Fig 1: Installing Foam Pad Over Seat Back Frame
    G01451678Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals