LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1181 (Stationary Window System) >> Repair Instructions >> Side Reveal Molding Replacement (Coupe and Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield weatherstrip side retainer. Refer to WEATHERSTRIP SIDE RETAINER REPLACEMENT (COUPE AND CONVERTIBLE)  or WEATHERSTRIP SIDE RETAINER REPLACEMENT (HARDTOP) .
    Fig 1: Windshield Weatherstrip Side Retainer
    G01450808Courtesy of GENERAL MOTORS CORP.
  2. Remove the windshield side reveal molding screws.
  3. Peel away the reveal molding with the applique from the windshield frame.
    Fig 2: Windshield Side Reveal Molding
    G01450809Courtesy of GENERAL MOTORS CORP.
  4. Remove the applique from the reveal molding.
  5. Clean all surfaces.
    Fig 3: Removing Applique From Reveal Molding
    G01450810Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals