LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine Controls - Removal & Installation, Overhaul) >> Fuel Systems >> Fuel Rail & Injectors >> Removal (2.2L)

Removal (2.2L)

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove air cleaner outlet resonator, air cleaner intake duct and vent hose from throttle body. Disconnect the vacuum pipe from the fuel pressure regulator. Remove the engine fuel supply and return pipes. Disconnect the fuel injector harness connectors. Remove the fuel rail attaching studs. See Figure .
    2. CAUTION: Use care when removing the fuel rail assembly in order to prevent damage to the fuel injectors electrical connector terminals and spray tips.
  2. Pull the fuel rail back and upward to remove the fuel injectors from the cylinder head ports. Rotate the fuel rail in order to position the injectors downward. Remove the fuel rail.
  3. To remove injectors from the fuel rail, remove the fuel injector retainer clip. Remove the fuel injector from the fuel rail. Visually inspect the fuel injector in order to determine if the upper "O" ring was also removed. If the upper "O" ring is not removed, remove the "O" ring from the fuel rail assembly. Remove and discard the fuel injector "O" rings.
scientia non olet · About LEMON Manuals