LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal/Side Marker Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb to the socket.
  2. Install the socket to the lamp assembly.
    Fig 1: Installing Bulb To Socket
    G01453386Courtesy of GENERAL MOTORS CORP.
  3. Position the brake caliper cooling duct to the front fascia and press the duct toward the fascia to secure.
  4. Install the front fascia lower closeout panel. Refer to CLOSE OUT PANEL - FRONT BUMPER FASCIA LOWER in Bumpers.
  5. Lower the vehicle.
    Fig 2: Positioning Brake Caliper Cooling Duct To Front Fascia
    G01453387Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals