LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the catalytic converter. Refer to CATALYTIC CONVERTER REPLACEMENT .
  2. Drill out the catalytic converter heat shield rivets.
  3. Remove the catalytic converter heat shield.
    Fig 1: Catalytic Converter Heat Shield
    G01971244Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals