LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1153 (Steering Wheel And Steering Column) >> Repair Instructions >> Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the following to the steering shaft:
    1. 1.1. inner race (1)
    2. 1.2. upper bearing inner race seat (2)
    3. 1.3. upper bearing spring (3)
    4. 1.4. turn signal cancel cam assembly (4)
    5. 1.5. shaft lock shield (5)
    Fig 1: Locating Steering Shaft Components
    G01419168Courtesy of GENERAL MOTORS CORP.
  2. Install the SIR coil assembly. Refer to SIR COIL ASSEMBLY .