Conditions For Setting DTC
WARNING: This page is about a different car, the 2003 Saturn Vue and 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0961 will set if the line PC solenoid actual current is outside of a calibrated current threshold for a given duty cycle as given in the following chart when:
- DTC P0960 and P0962 have not set.
- Engine speed is greater than 500 RPM for at least 5 seconds.
- Ignition voltage is 8-18 volts.
DTC P0961 diagnostic runs continuously when the above conditions have been met. DTC P0961 is a type "B" DTC.