Removal Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P upper trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER in Instrument Panel, Gages and Console.
- Remove the side window defogger upper outlet duct.
- 2.1. Remove the push-in retainers.
- 2.2. Use a twisting motion to release the upper duct from the lower duct.
- Remove the side window defogger lower outlet duct.
- 3.1. Remove the push-in retainer.
- 3.2. Use a twisting motion to release the lower duct from the windshield defroster duct.