LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1144 (Engine Controls Diagnosis - 6.0L - Alternative Fuels (DTC P0005-DTC P2665)) >> Diagnosis >> DTC P0191: Fuel Rail Pressure Sensor Performance >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The fuel rail pressure (FRP) sensor is a pressure sensor. The powertrain control module (PCM) supplies about 5 volts on the FRP sensor reference voltage circuit. The PCM also supplies a ground circuit and a signal circuit to the FRP sensor. When the fuel rail pressure is normal, the FRP signal voltage rises to near 2.5 volts. If the fuel rail pressure increases, the FRP signal voltage increases. The PCM uses the FRP sensor data in order to adjust fuel trim.

This DTC sets when the FRP sensor signal voltage is outside of the normal operating range of the sensor.

scientia non olet · About LEMON Manuals