High Pressure Line
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The high pressure line is stainless steel tubing with matching high pressure O-ring face seal (ORFS) fittings. The individual tubes are pre-formed with fittings installed. All O-ring face seal fittings use nitrite rubber O-rings and must be replaced with the correct replacement part whenever a line is opened.
When installing pipe thread fittings DO NOT use Teflon® tape. Tape fragments could lodge in a regulator and allow fuel pressure to exceed specified levels. The use of pipe sealant with Teflon® is required.