LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1126 (Engine Mechanical (Introduction) - 3.6L (Ly7)) >> Description and Operation >> Engine Component Description >> Crankshaft

Engine Component Description: Crankshaft

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

The crankshaft is a forged steel design with 4 main bearings. Crankshaft thrust is controlled by the number 3 main bearing. The crankshaft position reluctor wheel is pressed onto the rear of the crankshaft in front of the rear main journal. The crankshaft is internally balanced with an integral oil pump drive machined into the nose in front of the front main journal.

scientia non olet · About LEMON Manuals