Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Set the HVAC controls in the vent setting to close the defroster door.
- Remove the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
- Remove the side window defogger ducts from the defroster outlet duct.
- Remove the defroster outlet duct retaining clips using the J 38778 .
- Remove the defroster outlet duct from the I/P carrier.
IMPORTANT:
The defroster door must be closed to allow clearance during defroster duct removal.