LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1111 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Rear (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Bench Seat Belt Buckle Anchor Bolt
    GM629158Courtesy of GENERAL MOTORS CORP.
  1. Remove the right and/or left rear split bench seat from the vehicle. Refer to Seat Replacement - Rear 50-50 Split in Seats.
  2. Place the rear bench seat with the bottom of the rear bench seat in the upward position.
  3. Remove the rear bench seat trim to access the right and/or left rear seat belt buckle anchor.
  4. Remove the bolt from the right and/or left rear bench seat belt buckle anchor.
    5. Fig 2: View Of Rear Seat Belt Buckle
    GM629069Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear seat belt buckle from the right and/or left rear seat belt anchor pulling the seat belt buckle through the slot in the rear seat cushion.
scientia non olet · About LEMON Manuals