LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1108 (Engine Mechanical (Repair Instructions 2 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 2 & Off-Vehicle Part 1) >> On-Vehicle Repair Instructions - Part 2 >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the powertrain module from the vehicle and install the engine to an engine stand. Refer to Engine Replacement .
  2. Remove the A/C compressor with the hoses from the engine. Refer to Air Conditioning (A/C) Compressor Removal .
  3. Remove the engine front cover. Refer to Engine Front Cover Replacement .
    4. Fig 1: Locating Oil Pan
    GM1394086Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil pan. Refer to Oil Pan Removal .
  5. Perform the following steps as necessary.
    1. Disassemble the oil pan. Refer to Oil Pan Disassemble
    2. Clean and inspect the oil pan. Refer to Oil Pan Cleaning and Inspection .
scientia non olet · About LEMON Manuals