Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the park brake cable.
- Install the park brake cable to the park brake cable bracket.
- Install the park brake cable to the park brake actuator.
- Install the rear park brake cable retaining nut and bolt.
Tighten: Tighten to 10 N.m (89 lb in).
- Install the park brake left side cable to the park brake equalizer.
- Secure the park brake cable to the rear crossmember with 2 rivets (1).
- Adjust the park brake cable. Refer to Park Brake Adjustment (Disc) or Park Brake Adjustment (Drum) .
- Lower the vehicle.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.