Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the powertrain engine, transmission, and frame assembly from the vehicle. Refer to Engine Replacement in Engine Mechanical - 3.6L (LY7).
- Remove the exhaust crossover pipe nuts (3, 5) and bolt (4).
- Remove the exhaust crossover pipe.
- Inspect the exhaust crossover pipe seal. Replace the exhaust crossover pipe seal only if it is excessively worn or damaged.