LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1095 (Engine Mechanical - 3.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt Routing
    GM368807Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt to all of the pulleys except the generator pulley.
  2. Rotate the drive belt tensioner in order to install the drive belt over the generator pulley.
  3. Fig 2: Illustrating Proper Alignment Of Drive Belt
    GM368806Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the drive belt is aligned into the proper grooves of the accessory drive belt pulleys.
  4. Ensure that the drive belt is properly routed.