Valve Lifter Installation

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Valve Lifters & Lifter Guides

Courtesy of GENERAL MOTORS CORP.

Coat the valve lifters using prelube GM P/N 12345501 (Canadian P/N 992704) or the equivalent.
Install the valve lifters in their original locations.
Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or the equivalent to the threads.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the valve lifter guides and guide bolts.
Tighten: Tighten the valve lifter guide bolts to 10 N.m (89 lb in).