LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1095 (Engine Mechanical - 3.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Pan Installation

Oil Pan Installation

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Illustrating Proper Sealer Application
    GM61840Courtesy of GENERAL MOTORS CORP.
  1. Apply sealer GM P/N 12346141 (Canadian P/N 10953433) or the equivalent to both sides of the crankshaft rear main bearing cap (1). Press sealer into gap using a putty knife.
  2. Fig 2: View Of Oil Pan & Bolts
    GM187041Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pan gasket.
  4. Install the oil pan.
  5. NOTE: Refer to Fastener Notice In Cautions and Notices.
  6. Install the oil pan bolts.

    Tighten:  Tighten the oil pan bolts to 25 N.m (18 lb ft).

  7. Install the oil pan side bolts.

    Tighten:  Tighten the oil pan side bolts to 50 N.m (37 lb ft).