LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Engine Mechanical (Repair Instructions 1 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 1) >> Crankshaft Balancer Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Balancer
    GM1394039Courtesy of GENERAL MOTORS CORP.
  1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation .
  2. Install the accessory drive belt. Refer to Drive Belt Replacement .
  3. Lower the vehicle or raise the frame and powertrain in order to align the frame to the vehicle.
  4. Install the frame right side bolts. Refer to Frame Replacement - Front (W/AWD) or Frame Replacement - Front (W/FWD) in Frame and Underbody.
  5. Remove the utility stand.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals