Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Align the grille pin and locking tabs to the front fascia.
- Press inward on the grille until all tabs are locked in place.
- Install the retainers to the top of the grille.
NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the grille screws.
Tighten: Tighten the grille screws to 2 N.m (18 lb in).
- Install the headlamp assembly refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) or Headlamp Assembly or Headlamp Bulb Replacement (Rendezvous) in Lighting Systems.