Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear split bench seat from the vehicle. Refer to Seat Replacement - Rear 50-50 Split .
- Remove the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench) or Seat Back Replacement - Rear (Bucket) .
- Remove the rear seat adjuster. Refer to Seat Adjuster Replacement - Rear (Split Bench) .
- Remove the J-hook retainers on the rear center of the rear seat cushion cover.
- Remove the J-hook retainers on the left rear edge of the rear seat cushion cover.
- Remove the J-hook retainers on the left side of the rear seat cushion cover.
- Remove the J-hook retainers on the right side of the rear seat cushion cover.
- Remove the hog rings from the rear seat belt area.
- Remove the hog rings from the rear seat cushion cover.
- Remove the rear seat cushion cover from the bottom of the rear seat cushion.
- Remove the hog rings from the rear seat cushion cover.
- Remove the rear seat cushion cover from the rear seat cushion.