Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition.
- Disconnect the evaporative emission (EVAP) canister purge valve electrical connector.
- Disconnect the EVAP canister purge pipe from the EVAP canister purge valve.
- Disconnect the vacuum supply hose from the EVAP canister purge valve.
- Remove the EVAP canister purge valve retaining bolt.
- Remove the EVAP canister purge valve from the intake manifold.