LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1071 (Engine Controls - 3.6L (Ly7) (Introduction)) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Vent Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Prior to VIN 4S558922 (100mm Sender)) or Fuel Tank Replacement (VIN 4S558922 and Later (130mm Sender)) .
  2. Fig 1: Evaporative Emission (EVAP) Canister Vent Solenoid Valve
    GM1396038Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the evaporative emission (EVAP) canister vent solenoid harness connector.
  4. Remove the EVAP vent hose from EVAP canister solenoid.
  5. Depress the EVAP canister vent bracket tab to release the EVAP canister vent solenoid.
  6. Remove the EVAP canister solenoid from the fuel tank.