Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the assist handle to the instrument panel. Install the assist handle nuts.
Tighten: Tighten the nuts to 8 N.m (71 lb in).
- Install the I/P cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.