LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Upper Garnish Molding
    GM620962Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear upper garnish molding by pulling the rear roof garnish molding to release the push-in retainers.
    2. IMPORTANT: The seat belt escutcheon is part of the seat belt assembly.
  2. Remove the seat belt escutcheon from the rear roof garnish molding using a small flat bladed tool.
  3. Disconnect the electrical connector from the rear cargo lamp.
  4. Remove the rear seat belt from the slot in the rear roof garnish molding.
  5. Remove the rear roof garnish molding from the vehicle.
scientia non olet · About LEMON Manuals