Conditions for Running the DTC

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0125, P0128, P0131, P0132, P0133, P0134, P0135, P0136, P0137, P0138, P0140, P0141, P0151, P0152, P0153, P0154, P0155, P0156, P0157, P0158, P0160, P0161, P0171, P0172, P0174, P0175, P0200, P0220, P0300, P0325, P0327, P0332, P0335, P0336, P0341, P0342, P0343, P0351-P0358, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0496, P0502, P0503, P0506, P0507, P1125, P1133, P1134, P1153, P1154, P1516, P2101, P2108,P2120, P2121, P2125, P2135 are not set.
The engine has been running for more than 10 minutes.
The intake air temperature (IAT) is between -7°C and +85°C (+20 and +185°F).
The barometric pressure (BARO) is more than 75 kPa.
The engine coolant temperature (ECT) is more than 70-120°C (158-248°F).
Since the end of the last idle period, the engine speed has been more than 900 RPM for 450 seconds.
The engine must be at a stable idle speed, within 200 RPM of desired idle.
The battery voltage is more than 10.7 volts.
The Closed Loop fuel control is enabled.